HIB-05 Mild Steel Bearing Heater
Exporter
- Power: 40 KVA
- Brand: Inventum
- Voltage: 440 V AC
- Size: 430 x 905 x 700 mm
66% Response Rate
WhatsAppCall Now
Automated Induction Bearing Heater Model UIH-2004, 440V
TrustSEAL
₹ 6,95,000- Voltage: 440V
- Model Name/Number: UIH-2004
- Power: 25/40 KVA
- Country of Origin: Made in India
94% Response RateWhatsAppCall NowMild Steel Bearing Induction Heater, Size: 1200 X 750 X 950 mm, 1 HP
₹ 2,55,000- Voltage: 240 V
- Brand: TM
- Power: 1 HP
- Heater Material: Mild Steel
75% Response RateWhatsAppCall NowPortable Induction Bearing Heater, Maximum Bearing Weight: 75 kg, 400 mm
₹ 15,000- Maximum Bearing Weight: 75 kg
- Maximum Bearing Outer Diameter: 400 mm
- Power: 3.6 kVA
- Input Voltage: 230 V
100% Response RateWhatsAppCall Now30X50mm Bearing Induction Heater, 0.4KVA
TrustSEAL
₹ 2,50,000- Power: 0.4KVA
- Size: 30X50mm
- Yokes Dia: 53X33X28mm
- Dia of extra Yoke: 23X18mm
83% Response RateWhatsAppCall NowBearing Induction Heater 4.0 KVA
Exporter
₹ 1,20,750- Types: Ring Heaters
- Voltage: 220V
- Heater Material: Bearing
Induction Heater for heating bearingModel No. EE 4.0Input: 240V, 1-Phase, 50Hz.Capacity: 4.0 K.V.ASpace between supports: (W) 160mm (H) 210mmWith 5 Nos. Standard yokes.1) 33,43,53,63,83mm ϕ No. or equivalent 2) 250 C Magnetic Temperature sensor 1 No. 3) Input cable 2.5 meters4) 32 A Industrial Plug and socket93% Response RateWhatsAppCall NowBearing Induction Heater
TrustSEAL
- Voltage: 440V
- Heater Material: Bearing Induction Heater
- Power(Watts): 2 kva to 250 kva
- Size: Customised
83% Response RateWhatsAppCall NowBearing Heater
he SKF medium induction heater TIH 100m has the same high standards of efficiency and performance as the smaller heater TIH 030m, combined with increased capacity. The advanced design of the power electronics allows features of accurate electric current control, cut-outs to avoid overheating, controls on rate of temperature increase, these are as some of the standard features in the TIH...m range. Placing the induction coil outside the heater s housing allows the heating of bearings weighing up to 120 kg (264 lb). The heater is equipped with thermal overheating protection to reduce the risk of damage to the induction coil and the electronics. In addition to temperature mode, the TIH 100m is equipped with a time mode for heating components other than bearings. The heater is supplied standard with three yokes and is available in two executions: 230V/50-60Hz or 400-460V/50-60Hz. Standard swivel arm for large size yoke Capable of heating a 97 kg (213 lb) bearing in less than 20 minutes, saving time and energy 2-step power setting and smaller yokes allow heating smaller bearings safely and at lower power consumption Temperature mode pre set at 110 C (230 F) to help prevent bearing over heating Automatic demagnetisation 3 years warranty SKF m20 concept "m20" represents the weight (kg) of the heaviest SRB 231 bearing which can be heated from 20 to 110 C (68 to 230 F) in 20 minutes. This defines the heater s power output instead of its power consumption.WhatsAppCall NowSKF Bearing Heater
Owing to the years of industrial experience, we have been able to serve our valued clients with a wide range of SKF Bearing Heater. Highly demanded in the market, this bearing heater is manufactured using high quality material and ultra-modern machines at vendors end. This bearing heater is used for heating diverse types of bearings. Before its final dispatch, we check this bearing heater on different quality parameters. Features: Compact designHigh quality Easy to installWhatsAppCall NowBearing Induction Heater
Bearing Induction HeaterGet Best PriceCall Now