₹ 14,257/Piece
Kusam Meco Digital Multimeters
To avoid electrical shock hazard, observe the proper safety precautions when working with voltage above 60 VDC or 30 VAC rms. These voltage levels pose a potential shock hazard to the user. Do not touch test lead tips or the circuit being tested while power is applied to the circuit being measured. Keep your fingers behind the finger guards of the test leads during measurement. Inspect test leads, connectors, and probes for damaged insulation or exposed metal before using the instrument. If any defects are found, replace them immediately. Do not measure any current that exceeds the current rating of the protection fuse. Do not attempt a current measurement to any circuit where the open circuit voltage is above the protection fuse voltage rating. Suspected open circuit voltage should be checked with voltage functions. Never attempt a voltage measurement with the test lead inserted into the mA/mA or A input jack. Only replace the blown fuse with the proper rating as specified in this manual.
.
Accessories : Test lead pair : batteries installed ; user s manual; BKP 60 banana plug type-K thermocouple.
Optional purchase accessories : USB interface kit BRUA-20; Magnetic hanger BMH-01; BKB32 banana plug to type-K socket plug adaptor.
The instruments conforms to CENELEC Low- voltage directive 2006/95/EC and Electromagnetic compatibility directive 2004/108/EC
AutoCheck V W ; Auto-ranging MAX / MIN record ; Crest mode (Peak Hold), Backlighted LCD ; Auto-ranging Relative Zero mode; Display Hold; EF-Detection (NCV); Interface capabilities with PC computer; Input warning detection.
Safety : Double insulation per IEC/UL/EN61010-1 Ed. 3.0, IEC/EN61010-2-030 Ed.1.0, IEC/EN 61010-2-033 Ed. 1.0, IEC/UL/EN61010-031 Ed. 1.1 and CAN/CSA-C22.2 No. 61010-1-12 Ed. 3.0 to to Category II 1000V, CAT III 600V and CAT IV 300V AC DC
Terminals (to Com) Measurement Category : V / mAmA / A : Category II 1000V, CAT III 600V CAT IV 300V AC DC. E.M.C. : Meets EN61326 -1:2006 (EN55022, EN61000-3-2, EN61000-3-3, EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8,EN61000-4-11, In an RF field of 3V/m:Capacitance function is not specified other function ranges: Total Accuracy = Specified Accuracy+100