Americos AFC (Oil & Water Repellent Finish), 10 L
TrustSEAL

₹ 250/Square Inch
- Packaging Size: 10 L
- Active Solid: Yes
- Cold Test: Yes
Introduction : Americos AFC is resistance to water and oil borne stains which is a highly desirable feature for many textile uses including outerwear, home furnishings and industrial fabrics. The excellent water repellency and high degree of oil repellency provided by Americos AFC is durable to washing and dry-cleaning. Special Features:
Compatible with most commonly used extenders and resinsDilutes readily with water to form a stable bathEffective at very low add-on levelsProvides a high level of water repellency and stain resistanceCures under normal resin conditionsDoes not contain flammable solvents General Properties :
AppearanceOpaque liquidTypeFluorochemical emulsionpH6Viscosity (25 C)50 cpsDensity (25 C)8.8 lbs/galIonic natureCationicSolubilityMiscible in water Water and Oil Repellent Finish for Textiles: Fabric preparation: For maximum water repellency, fabrics should be free of all sizing agents, wetting agents, alkali and other additives, which may have a tendency to interfere with repellent properties. Fabrics should be well prepared and left slightly acidic for best results. Silicone defoaming agents reduce oil resistance and their use should be avoided in all preparation stages, including sizing of the warp. Silicone water repellents are also very detrimental. The presence of these materials even in minute amounts makes it practically impossible to obtain a satisfactory oil rating. Bath make-up : Americos Olifulant-O-W-992 is an aqueous emulsion that is readily dispersible in water. It is compatible with many resins, catalysts, hand-builders and other finishing products. The order and manner of addition of these products could affect bath stability. Americos Olifulant-O-W-992 emulsion should be the last add to the bath and should be pre-dispersed with an equal quantity of water. It is recommended that bath temperature be in the range of 80 -100 F. Excessive high-speed mixing of the bath should be avoided. Processing conditions: Impregnation: Pad the fabric with Americos Olifulant-O-W-992 using a two or three bowl padding mangle. Cloth that enters the bath should be at room temperature to prevent warming the pad bath. Placing a cooling fan in front of the padding mangle may help this. Pre-drying: For best results, the impregnated fabric should be pre-dried nearly to 30-40% moisture content before entering the drying chamber and this would increase the process speed. Infrared pre-driers are preferred, but roller type pre-driers or Teflon coated cans may also be used. Drying : For fabrics that require heat setting, temperature inside drying chamber may be kept at 365 to 400 F. Curing: Sixty seconds at 340 F is a typical curing method, however, the optimum time and temperature may vary with fabric type and its blend, GSM and oven characteristics. Formulations: Water and oil repellent, durable finish for cotton and cellulosic/synthetic blends.
Product% by weightAmericos Olifulant-O-W-9921.0 - 2.0
69% Response Rate
WhatsApp
Call Now

