Puncture Protection Solution-Puncture Guard!! Puncture Guard solution can convert pneumatic tyre into a self-sealing tyre that will maintain air pressure and and coat the entire inner surface of a spinning tyre without succumbing to the shear and stress associated with centrifugal force created within a rotating tyre. Once Puncture Guard solution has been installed, it will lay dormant at the bottom of the tyre until the vehicle is driven. Once driven few KM, solution disperses throughout the inner air cavity and forms a coating on the tyre inner surface of the tyre/ wheel. The flexing of the tyre and the normal heat built up will allow Puncture Guard solution to seek out and eliminate common air loss problems (referred to as air migration and bead leaks). Puncture Guard solution then transforms the tyre into a sealed air chamber, capable of maintaining desired air pressure. Thereafter Puncture Guard solution conditions the rubber in order to retard dry rot and hardening of casing. One treatment will provide additional longevity and cooler running tyre. When a tyre is punctured, Puncture Guard solution coats the surface of penetrating object thus preventing air loss. When the puncturing object is removed, the rubber recovers and wound immediately closes. Any escaping air will siphon solution in to wound. The fibres begin to entwine and create a clot to prevent any additional air from escaping Key Advantage of Puncture Guard solution Eliminate air migration from the tyres. Make tyres run cooler without changing the handling characteristics. Increases fuel economy. Eliminates most flats and blow outs. Preserve tyre casings. Protect wheel rims from corrosion. Not ball up or dry out.
