Exporter
Fire Alarm System
₹ 3,000/Piece
- Relay Outputs: Alarm Relay
Overview : SIGI-271 Fire Alarm Call Points are part of Edwards s Signature Series system. These integrated assemblies feature the familiar KAC Installers Series Call Point packaged with Signature Series intelligent addressable/analogue interface electronics. In all 271 Series Call Points, the switch is held off by the edge of the glass. When the glass is broken by pressing directly on it, the switch is released and an alarm sent to the Signature loop controller. A protective plastic coating on the glass prevents operator injury and inhibits the release of glass fragments. Each Signature Series Call Point constantly runs self-checks to provide important maintenance information. The results of the self-check are automatically updated and permanently stored in the Call Point s non-volatile memory. This information is accessible for review any time at the control panel, PC, or by using the SIGAPRO Signature Program/Service Tool. The information stored in the Call Point s memory includes: Call Point serial number, address, type code. Manufacture date, hours of operation, last maintenance date. Number of recorded troubles, alarms, time and date of last alarm. Up to 24 possible trouble codes that may be used to specifically diagnose faults. Standard Features : Intelligent Device with Integral Microprocessor All decisions are made at the Call Point to allow lower communication speed. Lower communication speeds are less sensitive to line noise; twisted or shielded wire is not required. Automatic Device Mapping Each Call Point transmits wiring information regarding its location with respect to other Signature devices on the circuit. Electronic Addressing Addresses are downloaded from a PC, or the SIGA-PRO Signature Program/Service Tool. There are no switches or dials to set. Non-volatile Memory Permanently stores serial number, type of device, and job number. Automatically updated with historic information. Stand-alone Operation Call Point can input an alarm even if the loop controller s polling interrogation stops. Alarm LED Red led flashes to show alarm state. Designed For High Ambient Temperature Operation Install in ambient temperatures up to 120 F (49 C). Flush or Surface Mount Optional Markings Available Glass inserts with multiple languages are available. Designed To ISO 9001 Standard Manufactured to strict international quality standards.
86% Response Rate
WhatsAppCall Now
