WEL Sealant -101 Butyl Based Compound intended for the general sealing of many joints in traditional forms of construction not exposed to sun light, rapidly and simply applied by hand extrusion gun good adhesion to most clean, dry surface. It has good slump resistance in vertical joints and possesses good durability and resistance to ageing which can be improved by painting. WEL sealant 101 Butyl sealant forms a skin in approximately 24 hours remains permanently plastic underneath. The sealant accommodates joint movement of + to 5%. Paint able and exhibits good UV and chemical resistance. Colours:- Wel sealant 101 Aviable colour Grey, Black, White. Areas For Use:- Wel sealant 101 Butyl sealant a single part a glazing compound. This sealant made for especially marian Container, Railway, Construction, Metal sector and Transportation Industry etc. Accessories:- Coulking guns Storage Life:- 18 Months in cool dry conditions. Application Temperature Range:- Suggest Temperature is form -10 to +55 . Service Temperature Range:- Heat Resistance : +120 Cold Resistance : -40 Slump Resistance:- Not slipping and sagaging at 75 channel placed vertically. Maintenance:- The life of Butyl wel sealant Gun grade sealing compound can be extended by regular painting. As and when the compound requires maintenance or repair this can be carried out by raking out the existing sealant and replacing with fresh material. Estimating Quantities:- 5mm 5mm (Joint size) = 16 meter per 400ml, one Cartridages. Wel Sealant 101 Benefits:- Over Panintable. Non Toxic. Good adhesion on different substrates without pretreatment. UV and ageing chemical Resistance. Good external weathering properties. Permanently elastic beneath. Packaging:- Wel sealant 101 Gun Grade sealing Compound is supplied in 400ml Rigid Carridges. INSTALLATIONS:- All surfaces must be dry, clean, free of frost, oil, dirt and loose material. When the joint width excel 5.5 an open cell backer rod must be installed. In shallow joints, a bond breaker tape must be installed to prevent three Point adhesion. Not to be used on insulating panels or plastic materials which can be affected by solvent. Does not with stand immersion (tanks) or abrasion (Foot traffic).