We offer a high quality range of Platelet Incubator Cum Agitator. The Technical Specification of Platelet Incubator Cum Agitator are as under: Model DF-150/80 Capacity 42 blood bags Construction The chamber is to be constructed in double wall. The interior of the chamber is to be made of Stainless Steel and the exterior is made out of Stainless Steel Control Panel is made of CRCA MS sheet with two coats of primer and 3 coats of DUCO paint with puf insulation in between. The chamber is to provide with a full front opening door. The door is to be fitted on the chamber by heavy-duty hinges and locking arrangement. Gaskit on the door. The Refrigerator is fitted with Castor wheels for ease of mobility. Insulation PUF insulation for better power saving purpose. Temp. Controller PID (Programmable) Microprocessor Based Temperature Controller used for controlling 22 C 1 C accuracy: 0.1 C Temp. Recorder Chart Recorder (Range -50 to +50 C), Accuracy: .2w C, for Temp. Display visually for continuous temperature monitoring Weekly Control panel Controls to compromise fully automatic temperature Indicator cum PID (Progra.) Microprocessor Based Temperature Controller with PT 100 Sensor, Temp. Recorder, Compressor, fans, Alarm etc. Inspection Lamp One low watt bulb for internal inspection automatically / manual operated. Cooling Unit Kirloskar make Compressor, which is CFC Free. Power Supply 230 Volts, Single Phase 50HZ,15 amp and Earthing Necessary Shelves 7 Nos in SS Jali Safety Electronic safety device to be incorporated that will give audiovisual alarming case of power failure along with Voltage Stabilizer along with Low High Voltage protector