CLH Gaseous Fuel Application Private Limited

The Garretson model KN is a secondary regulator designed for sensitivity and simple operation.It is used with low pressure vaporized gaseous fuels

The Model PJ Series is a positive pressure, two-stage regulator. It is designed for positive pressure CNG fuel systems where liquid vaporization and engine coolant heating is not required. These regulators are able to provide positive flow in applic...

Dual fuel engines are not uncharted technology. They have been used in industry for many years. However, the ECI Economizer dual fuel system described in these pages is unique because it applies automated controls and monitoring to newer engine syst...

Solenoid Valve

The HPR-3600 is a single stage high pressure regulator designed for high pressure CNG (compressed natural gas) systems. This regulator is engine coolant heated to prevent freezing and has dual outlet ports for universal installation flexibility. The...

The ALGAS Model FT-60 mixer is a single diaphragm air gas valve carburetor/mixer. It offers a 90-degree air inlet to provide low overhead clearance. This mixer is available for propane application. The mixer is equipped with ports for both balance l...

Solenoid Valve

The IMPCO Model EV & PEV Series are two-stage regulators / converters. They are intended for vapor withdrawal systems. Heating with engine coolant is not required. Diagnostic test ports are standard for both the primary and secondary pressure ch...