Automatic UV Flexo Printing Press

Model: @ flexo 601000
1000/ mm 6 - colors Flexographic High Speed Printing Machine Standard scope of supplyThe machine consisting of:UNWIND UNIT:_ Two Roll reel stand of center winding type_ Maximum reel outer diameter is 1000 mm, and maximum rell weight 500 kgs._ Unwind shaft is mounted of on safety chucks with reel cones for 76 core i.d._ Manual centering Devise – 1nos._ Unwind tension controlled by 1no. manual spring loaded friction type woolen felt paddedbrake._ Shaft for 76 mm core i.d. is provide_ Auto stop mechanism to stop the machine for the break in web.PRINTING UNIT_ Side frame Construction is of Ribbed anti vibration cast iron body (75mm) wide preciselymachines._ Cerami Anilox Roll 700 # LPI duly balanced and hard chrome plated._ 1 no. Impression Roller duly balanced, Grinded and hard chrome plated_ Minimum maximum cylinder repeat sie 230 mm to 500 mm_ All the above Roller are inter connected with each other and are Gear driven_ Pressure for inking Rollers to Anilox Roller and Anilox Rollers to Plate Cylinder is providedthrough screw type shaft with sliding arrangements on the square and ‘L’ Blocks Two nos.Lock nuts is provided to lock the printing deck while in operationMAIN DRIVE:_ 5 hp Digital AC drive with common AC motor is provided for all the printing stationsINFEED & OUTFEED UNIT_ Common In feed and out feed helps to maintain tension continuously betwn printing zones& also maintains good registrationDRYING UNIT_ Designed for electric heating comprising of 5hp. AC Blower inter connected with 12 kwHeaters of 1kw each._ Hot Air spread to the drying head box fitted immediately after each printing station throughFlexible Pipes._ Drying head is provided in each Printing station with overhead drying chambers after lastprinting stations.Note : Can Also be designed fot Thermic Fluid, Diesel Hot Air System etc. and be fittedaccordingly on request on request at extra cost. (Please Specify)REGESTRATION UNIT_ Manual side lay (lateral) register by means of a mounting blocks on the operator side._ Vertical Registration adjustment is done by screw type shaft on operator side.