Brand: PREVEST DENPRO
Material: liquid
Copal F is a Copal Gum based protective varnish for the insulation of the exposed dentine, reduces penetration of fluids into the tooth and subsequent placed restoration. Addition of Sodium Fluoride provides a thermal barrier for deep restoration.GST
Verified Exporter
7 yrs
★★★★★4.2(63)GST
Verified Exporter
7 yrs
★★★★★4.6(1383)Usage/Application: Commercial
Material Type: Steel
DENTMARK DENTAL PORCELAIN VENEER 6001#( SET OF 6 PCS)GST
TrustSEAL
9 yrs
★★★★★4.2(120)Type: Box
Form: syringe
DESCRIPTION: SafeEndo IodoCure calcium Hydroxide paste with iodoform (Radiopaque), used as temporary or permanent root filling material. Calcium hydroxide with Iodoform is used for stimulating the healing process. This paste is packaged in a convenient syringe to eliminate messy mixing. The action of calcium hydroxide is achieved through the ionic dissociation of Ca(2+) and OH(-) ions and their effect on vital tissues, the induction of hard-tissue deposition, and the antibacterial properties. Iodoform has been added to Ca(OH)2 due to its antibacterial effect, healing properties, and ability to be resorbed when in excess . Advantages : Strong antiseptic properties (contains iodoform) High pH value (12.8),provides fast,continuous and durable bactericidal effect during treatment of infected canals,and in periapical area (99% of bacteria are killed within 48 hours after root canal filling with the paste) Paste is easily removed from canals if necessary Stimulates hard tissues formation in apex Syringe with reinforced plunger,convenient to hold in hand, Luer-Lock cap Ultra-thin dispensing tips (0.52 mm with a hole size 22) allow to apply paste directly into canals INDICATIONS : Paste is used as temporary filling of tooth root canals during staged treatment and as permanent filling of tooth root canals at the final stage of the treatment. Paste IodoCure is used for : Treatment of acute and chronic forms of periodontitis Treatment of pulpitis, granulomatous periodontitis and granulating periodontitis For Apexification during treatment of tooth root canals with open apex in periodontitis Treatment of cystic lesion and chronic granuloma In case of root perforation and root resorption As permanent filling material for infected root canals after its treatment As permanent filling material for milk teeth FEATURES: Paste has a strong bactericidal effect. Iodoform provides prolonged antimicrobic effect in root canal microflora. When in contact with tissues iodoform undergoes gradual decomposition evolving free iodine. Hydrophobical paste-forming component provides paste s fluidity and plasticity, ensures hermetic sealing of root canal, protects soft tissues when inserting paste out of the apex. Calcium containing filler stimulates hard tissues formation at the apex level, provides alkaline (pH 12,8) antimicrobial medium and gradual paste hardening under the influence of in-thecanal moisture. Paste hardens in canal under the influence of in-the-canal moisture within 1-3 months. During hardening and after it the material can be easily removed out of the canal. Being out of apex in soft tissues paste reabsorbs. When filling of milk teeth paste reabsorbs as quickly as tooth resorption is held. Paste can be applied with gutta-percha or polypropylene points. IodoCure does not prevent from formation and developing of dental bud In order to avoid tooth crown coloring do not fill whole pulp cavity with the paste KEY SPECIFICATION: COMPOSITION : Iodoform Calcium containing filler Hydrophobical paste-forming component STORAGE : Store at the temperature from 5 C to 25 C Do not use after expiry date Shelf life 3 years PACKAGING: 2 x IodoCure syringe (2 gm)GST
TrustSEAL
9 yrs
★★★★★3.9(55)Prescription/Non prescription: Prescription
Treatment: Used in case of root canal treatment to make a thick paste with zinc oxide
PRODUCT DETAILS :- The Germicidal Properties of the oil make it very effective for relieving dental pain, toothache, sore gums and mouth ulcers. APPLICATION:- Used in case of Root canal treatment to make a thick paste with zinc oxide. Packing :-15 ml Plastic Bottle. COMPOSITION :- Tannic Acid , Glycerin, Excipients Shelf Life :- 3 years from the date of Manufacturing.GST
TrustSEAL
7 yrs
★★★★★4.2(67)Packaging Type: In hdpe container
Dosage Form: Liquid
Enriched by our vast industrial experience in this business, we are involved in offering an enormous quality range of Medico Tooth Ache Relieve Drops. Details: Ancient Concept New Horizon Ensure Health A GMP Certified Company Each 1 ml. Contains :Purified alum (Padikaram)1%Mentha sativa (Pudhina)1%Bornia camphor (poongkarpuram}1%Mystus caryaphyllus (Kirambu)17%Sesamum indicum oil (Gingelly Oil)80%GST
TrustSEAL
12 yrs
★★★★★4(82)GST
Verified Exporter
4 yrs
★★★★★3(6)GST
TrustSEAL
15 yrs
★★★★★4.1(205)GST
TrustSEAL
11 yrs
★★★★★3.9(88)Country of Origin: Made in India
size: 27.5 x 23cm
Doctor is in or Out Sign board thick board Material. Can be hanged out side the Doctor's Cabin or glass to inform patient about the status of working. Use Doctor is In sign when Doctor is available at clinic and Doctor is out Sign when Doctor is not in Clinic. It comes with a Chain which can be used for hanging it easily on nail or door hangers. Pull Push comes with Back Side Gumming Double Tape , it can be easily Remove Release And Easy Stick on Wall and Doors . Dental themed Pull Push is specially designed for Dental Clinics. Considering the requirments of Dentist. Sign Board, Pack of 2 Pcs. Product Size : In Out Size 27.5 x 23cm / Pull Push Size 12.5 x 11GST
TrustSEAL
12 yrs
★★★★★3.8(19)Service Location: Dextrose Technologies Pvt Ltd
Duration: Variable
Pharmaceutical Microbiology Dental Treatment Services focus on the intersection of microbiology and dental care, specifically addressing microbial-related issues in pharmaceutical products used in dentistry. These services ensure that dental treatments and products are safe, effective, and free from harmful microorganisms.GST
TrustSEAL
7 yrs
★★★★★4.1(49)Form: Liquid
Packaging: Rs 120/- for 450 ml Bottle
Overview: Insulating medium for plaster stone cast to produce plaster free acrylic denturesGST
TrustSEAL
14 yrs
★★★★★4.3(20)Service Location: India
Brand: Julldent
SINUS LIFT ELEVATORS JULL-DENT 008 Sinus Elevators: Used to aide in the lifting up of the sinus cavity for implant site preparation. Elevators feature a more round, smooth tip for lifting the sinus with minimal puncture risk. Sinus Curettes: Sinus Curettes feature a cutting edge for scraping purposes, but can also be used to lift sinus in preparation for implant procedures. Tip Material: Titanium grade 5 Handle Material: Silicon Handle. (Now available in silicon handles ONLY) A) Sinus Lift Elevator No.1 (Short Tip 9mm) JULL-DENT 008A To separate and elevate the sinus membrane. Triple angulated tip permits easy access to any where at any directions. Short or long tip can be used depend on accessibility. B) Sinus Lift Elevator No. 2 (Long Tip 15mm) JULL-DENT 008B To separate and elevate the sinus membrane. Triple angulated tip permits easy access to any where at any directions. Short or long tip can be used depend on accessibility. C) Sinus Lift Elevator No. 3 JULL-DENT 008C The Obtuse Angle will facilitate Easy Access to the Mesial, Distal, Superior Inferior Aspects. D) Graft Material Spoon + Tapered Graft Packer JULL-DENT 008D Graft Material Spoon (8mm x 15mm): To carry the bone graft material. Tapered Graft Packer 3.0mm / 4.0mm: It is used in Maxillary Sinus Operation to complete the hole. Lift up the initial maxillary sinus membrane and pack the Bone. E) Freer Elevator Curved 3mm/5mm JULL-DENT 008E To separate and elevate the sinus membrane. To pack the bone graft material into the sinus cavity. F) Membrane Separator + Pikos Graft Packer Angled 4.0mm JULL-DENT 008F Membrane Separator/Lifter 5mm: To separate sinus membrane at initial stage. Pikos Graft Packer Angled 4.0mm: Concave Tips. Tip Diameter: 4mm. Excellent in Sinus Condensation.GST
14 yrs
★★★★★4.2(38)Model: UNI00010A(i)
Warranty: 1 Year
Unident Dental Acrylizer/Polymerzition Temp. is controlled with digital display and controller cum digital timer when the time will complete alarm will be operational with S.S. drain plug, To work on 220/230 volts AC. The gap between the walls is filled with glass wool to minimize loss of temperature. Double Walled, Outside inside body made of Stainless steel 304 Grade. Inner Size 300 x 250 x 350 mm Warranty 1 YearGST
TrustSEAL
15 yrs
★★★★★4.6(33)Usage/Application: Clinical
Brand: TYPLON Oral Paste
Typlon Dental Paste is indicated for adjunctive treatment and for the instant relief of symptoms associated with oral inflammatory lesions and ulcerative lesions resulting from trauma.GST
TrustSEAL
14 yrs
★★★★★3.7(500)Product Name: MOLEGRID(TM) Temp C&B Resin
Brand: Kexcelled
Protomont Technologies proudly introduces MOLEGRID Temp C B Resin a premium tooth-colored dental resin engineered for fast, precise, and reliable production of temporary crowns and bridges. Manufactured by Kexcelled, this advanced photopolymer resin is now available in India to meet the needs of dental labs and clinics that demand both strength and aesthetic accuracy. Ideal for short-term restorations, this high-performance dental resin offers natural shade-matching, excellent flexural strength, and seamless compatibility with leading 405nm 3D printers making it a go-to solution for digitally driven practices. Developed for Modern Dental Workflows In clinical scenarios where accuracy, aesthetics, and turnaround speed are critical, MOLEGRID Temp C B Resin delivers dependable results for both anterior and posterior applications. From chairside single crowns to lab-printed multi-unit bridges, this resin simplifies the workflow without compromising quality. Formulated by Kexcelled, a global leader in dental 3D printing materials, the resin is designed for short-term intraoral use with verified biocompatibility, high polishability, and natural-looking finishes. Key Features of MOLEGRID Temp C B ResinTooth-Colored Aesthetic Match Blends smoothly with surrounding teeth, providing patients with confidence and comfort during their temporary restoration period. High Flexural Strength and Long-Term Stability With a flexural strength of 93.98 MPa and modulus of 2600 MPa, this resin performs well in high-stress regions, including posterior temporary bridges and long-span cases. Fast and Easy Post-Processing Minimal polishing required. Produces smooth, clean surfaces right after printing, reducing lab time and optimizing chairside delivery. Biocompatible for Short-Term Intraoral Use Safe for temporary intraoral contact. Complies with standard dental biocompatibility requirements, supporting clinical safety protocols. Broad Compatibility with Leading Dental 3D Printers Works seamlessly with all major 405nm UV LCD and DLP systems. Tested with ELEGOO, Anycubic, Phrozen, Creality, Flashforge, and other professional dental 3D printers.GST
TrustSEAL
5 yrs
★★★★★4.3(61)Size: Standard
Color: Blue
Non-corrosive rugged custom painted finish Separate On/Off Switches to control model and form Powerful vacuum motor provides precise downward suction Solid construction for high durability and long life Side handle makes convenient and safe to operate controls Protective net on the upper cover to avoid touching the heating device Compact appearance saves countertop place Symmetrically heating element for uniform heat distribution Heater hood rotates behind the center post for safety and convenience Useful in various of clinical applicationsGST
TrustSEAL
1 yr
★★★★★4.6(13)GST
3 yrs
★★★★★4.9(34)GST
6 yrs
GST
2 yrs
GST
8 yrs
★★★★★3.2(35)Size: 1.0-3.0 mm (Pack Size 10cc)
Material: Synthetic Bone Graft
B-OstIN Granules 1.0-3.0 mm is a 100% synthetic, biocompatible bone graft substitute made of hydroxyapatite (HA). It is designed for bone regeneration procedures in dental and orthopedic applications.GST
TrustSEAL
2 yrs
★★★★★3.8(12)GST
10 yrs
★★★★★5(1)GST
Verified Exporter
4 yrs
★★★★★4.8(593)Service Location: Pan India
Type: Cordless
The K-Life water flosser is designed to clear up to 99.9% of food debris and dental plaque by using a stream of high-pressure pulsating water. Water floss is up to 50% more effective than traditional floss and helps heal and improve gum health.GST
14 yrs
★★★★★3.9(122)Brand: Erkodent
Usage/Application: Dental Aligners
Thermoforming is a manufacturing process where a plastic sheet is heated to a pliable forming temperature, formed to a specific shape in a mold, and trimmed to create a usable product. The sheet, or "film" when referring to thinner gauges and certain material types, is heated in an oven to a high-enough temperature that permits it to be stretched into or onto a mold and cooled to a finished shape. Its simplified version is vacuum forming. Thickness Available = 0.6mm, 0.8mm 1mmDia Available = 120mm 125mmGST
TrustSEAL
13 yrs
★★★★★4.3(32)GST
TrustSEAL
11 yrs
★★★★★4.2(93)GST
6 yrs