Panasonic PT-RZ870L DLP Projector, 1920 x 1200 pixel

Screen Size

1.27 – 15.24 m (50 inch – 600 inch), 1.27 – 5.08 m (50 inch – 200 inch) With ET-DLE055, 2.54 – 8.89 m (100 Inch – 350 Inch) With ET-DLE030, 16:10 Aspect Ratio

Display Type

DLP Chip x 1, DLP Projection System

Model Number

PT-RZ870L

Brand

Panasonic

Resolution

1920 x 1200 pixel

Lamp Life

20000 hours (Normal Mode) / 24000 hours (Eco Mode)

Power supply

100–240 V AC, 10.4–5.0 A, 50/60 Hz

Power consumption

950 W (0.3 W with STANDBY MODE ECO, 3 W STANDBY MODE NORMAL, 85 W with QUICK STARTUP set to ON); 689W (NORMAL MODE), 583 W (ECO MODE), 393-548 W (LONG LIFE1 MODE), 363-548 W (LONG LIFE 2 MODE), 334-548 W (LONG LIFE 3 MODE), 82 W (SHUTTER MODE)

DLP chipt- Panel size

17.0 mm (0.67˝) diagonal (16:10 aspect ratio)

DLP chipt- Pixels

2,304,000 (1920 x 1200) pixels

Lens

Optional powered zoom/focus and fixed-focus lens

Light source

Laser diodes (Class 1) (Class 3R for US models), light source life: 20,000 hours (Normal Mode) / 24,000 hours (Eco Mode). At this time, brightness will have decreased to approximately half its original level [Operating temperature: 30 °C (86 °F), altitude: 700 m (2,297 ft), dust density 0.15 mg/m3, Dynamic Contrast Mode: 3] Includes Quiet 1/Quiet 2 Mode.

Brightness

8,800 lm (Center) / 8,500 lm / 7,200 lm (Quiet 1) / 5,400 lm (Quiet 2)

Contrast

10,000:1 (Full On/Full Off, Dynamic Contrast Mode: 3)

Supported RGB signal

XGA–WUXGA

Supported video signal

NTSC/PAL/SECAM, 480p/i, 720p, 1080p/i

Optical axis shift (from center of screen) - Vertical

+50 %, -16 % (powered)

Optical axis shift (from center of screen) - Horizontal

+30 %, -10 % (+28 %, -10 % with the ET-DLE085/DLE105) (powered)

Keystone correction range

Vertical: ±40 ° (±22 ° with ET-DLE085/DLE055, +5 ° with ET-DLE030), horizontal: ±15 ° (cannot be operated with ET-DLE030)

Keystone correction range with optional Upgrade Kit ET-UK20

Vertical: ±45° (±40° with ET-DLE150/ET-DLE250/supplied lens [DLE170], ±22° with ET-DLE085/ET-DLE055), horizontal: ±40° (±15° with ET-DLE085/ET-DLE055), Up to a total of ±55 ° during simultaneous horizontal and vertical correction.

Installation

Ceiling/floor, front /rear, free 360-degree installation

Cabinet materials

Molded plastic

Dimensions (W x H x D)

498 x 200 x 538 mm (19 19/32 inch x 7 7/8 inch x 21 3/16 inch) (without lens)

Weight

Approximately 22.4 kg (49.4 lbs) (without lens)

Operation noise

41 dB (37 dB [Quiet1] / 35 dB [Quiet2])

Operating environment

Operating temperature: 0–45 °C (32–113 °F), operating humidity: 10–80 % (no condensation)

Applicable software

Logo Transfer Software, Multi Monitoring Control Software, Early Warning Software, Geometry Manager Pro (ET-UK20 Upgrade Kit and ET-CUK10 Auto Screen Adjustment Kit)