
Specifications
Screen Size
0.76–7.62 m (30–300 inch) (16:10 Aspect Ratio)
Display Type
Transparent LCD Panel (× 3, R/G/B) System
Model Number
PT-VMZ50
Brand
Panasonic
Resolution
1920 × 1200 pixel
Throw Ratio
1.09-1.77:1
Power supply
AC 100V - 240V, (3.9A-1.7A) 50Hz/60Hz
Power consumption
370 W
Power consumption - NORMAL
370W
Power consumption - ECO
300W
Power consumption - SHUTTER
71W
Power consumption - STANDBY MODE [ECO]
0.4W
Power consumption - STANDBY MODE [NORMAL]
18W
Power consumption - [STANDBY MODE] is set to [NORMAL]: [AUDIO SETTING] → [IN STANDBY MODE] is set to [ON]
45W
Power consumption - BTU value
Max 1263BTU
LCD panel - Panel size
16.3 mm (0.64 inch) diagonal (16:10 aspect ratio)
LCD panel - Pixels
2,304,000 (1920 × 1200)
Light source
Laser Diode
Light output
5000 lm (When [LIGHT POWER] is set to [NORMAL]); ([INPUT SIGNAL] is set to [PC], [PICTURE MODE] is set to [DYNAMIC]; [DAYLIGHT VIEW] is set to [OFF]; [AUTO POWER SAVE ] is set to [OFF]; 3300 lm (When [LIGHT POWER] is set to [ECO][QUIET])
Time until light output declines to 50 %
20,000 hours
Filter Replacement Cycle
20,000 hours (Under the dust conditions of 0.08mg/㎥); 10,000 hours (Under the dust conditions of 0.15mg/㎥); Filter can be washed and reused up to two times.
Contrast
3,000,000:1 (All White/All Black) (When [PICTURE MODE] is set to [DYNAMIC], [DYNAMIC CONTRAST] is set to [1])
Center-to-corner uniformity
85%
Lens
1.6x Manual zoom (Throw ratio:1.09-1.77:1) / Manual focus lens, F=1.6–2.12, f=15.30–24.64 mm
Compatible signal - VIDEO
fH: 15.73 kHz / 15.63 kHz fV: 59.94 Hz / 50 Hz
Compatible signal - RGB
Resolution: 640 × 400 to 1920 × 1200; Dot clock frequency: 162 MHz or less; PIAS (Panasonic Intelligent Auto Scanning) system
Compatible signal - YPbPr(YCBCR)
Resolution: 480i/576i to 1920 × 1080; Dot clock frequency: 148.5 MHz or less; The HD/SYNC and VD terminals do not support 3 value SYNC
Compatible signal - HDMI
Moving image signal resolution: 480i*6 /576i*6 to 4096 x 2160; Still image signal resolution: 640 × 400 to 1920 × 1200 (non-interlace); Dot clock frequency: 25 MHz to 297 MHz
Compatible signal - DIGITAL LINK
Moving image signal resolution: 480i*6 /576i*6 to 4096 x 2160; Still image signal resolution: 640 x 400 to 1920 x 1200 (non-interlace); Dot clock frequency: 25 MHz to 297 MHz
Optical axis shift - Vertical
+44%, 0% (manual)
Optical axis shift - Horizontal
+20%, -20% (manual)
Installation
Ceiling/floor, front/rear
Terminals - COMPUTER 1 IN
high-density D-Sub 15 p (female) +1 [RGB signal] R: 0.7 Vp-p ,75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G) , 75 ohms, B: 0.7 Vp-p ,75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic [YPBPR signal] Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Terminals - COMPUTER 2 IN / 1 OUT
high-density D-Sub 15 p (female) +1 [RGB signal] R: 0.7 Vp-p ,75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G) , 75 ohms, B: 0.7 Vp-p ,75 ohms HD, VD/SYNC: TTL, high impedance, positive/negative automatic [YPBPR signal] Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Terminals - VIDEO IN
Pin jack +1 1.0 Vp-p, 75 ohms
Terminals - HDMI 1 IN
HDMI 19 pin +2, HDCP and Deep color compatible
Terminals - HDMI 2 IN
Audio signals : Linear PCM (Sample frequency : 48 kHz/44.1 kHz/32 kHz) 4K/30p signal input compatible
Terminals - AUDIO IN 1 & AUDIO IN 2
M3 stereo mini jack +2, 0.5 V[rms], input Impedance 22 k ohms and more
Terminals - AUDIO IN 3
Pin jack x 2(L-R), 0.5 V[rms], input Impedance 22 k ohms and more
Terminals - VARIABLE AUDIO OUT
M3 stereo mini jack +1, 0 V[rms] to 2.0 V[rms] variable, output Impedance 2.2 k ohms and less
Terminals - USB [VIEWER/WIRELESS/DC OUT]
USB connector(type A) +1 for Memory Viewer/Wireless Module (Out put 5V MAX 2A On standby, power supply is impossible when[STANDBY MODE]is set to[ECO].)
Terminals - SERIAL IN
D-sub 9 pin +1, RS-232C compliant, for computer control use
Terminals - DIGITAL LINK/LAN
RJ-45 × 1 for network and DIGITAL LINK (video/network/serial control) (HDBaseT compliant), PJLinkTM (class 2)compatible, 100Base-TX, HDCP compatible, Deep Color compatible 4K/30p signal input compatible
Terminals - LAN
RJ-45 × 1 for network connection, PJLinkTM (class 2) compatible, 10Base-T/100Base-TX
Power cord length
2.0 m (6 ft 7 inch)
Cabinet materials
Molded plastic
Dimensions (W × H × D)
399 x 133*7 x 348 mm (15-23/32 x 5-1/4*7 x 13-11/16 inch)
Weight
Approx. 7.2 kg (15.9 lbs.)
Operation noise
37 dB[When [LIGHT POWER] is set to [NORMAL]] / 27 dB[When [LIGHT POWER] is set to [QUIET]]
Laser Classification - Laser Class
USA and Canada: Class 3R (IEC 60825-1:2007) Other countries or regions: Class 1 (IEC/EN 60825-1:2014)
Laser Classification - Risk Group
Risk Group 2 (IEC 62471-5:2015)
Operating temperature
0 –45 °C (32 –113 °F)
Operating humidity
20%– 80% (no condensation)
Remote control unit - Power supply
3 V DC (AAA/R03/LR03 battery × 2)
Remote control unit - Operation range
Approx. 30 m (98 ft 5 inch) when operated from directly in front of the signal receptor
Remote control unit - Dimensions (W × H × D)
48 × 145 × 27 mm (1-7/8 × 5-23/32 × 1-1/16 inch)
Remote control unit - Weight
Approx. 102 g (3.6 ozs.) including batteries
Other Applications
Multi Monitoring and Control Software (for Windows); Logo Transfer Software (for Windows); Presenter Light Software (for Windows); Wireless Projector (for iOS / Android)
Supplied accessories
Power cord with secure lock (× 1) (× 2 for Europe / ASIA models) Wireless remote control unit (× 1) Batteries for remote control (AAA/R03 or AAA/LR03 battery x 2) Lens cap (× 1) String (× 1) (for lens cap)
Optional accessories - Digital interface box
ET-YFB100G
Optional accessories - Digital LINK Switcher
ET-YFB200G
Optional accessories - Ceiling mount bracket
ET-PKL100H (for high ceilings) & ET-PKL100S (for low ceilings)
Optional accessories - Attachment for ceiling mount bracket
ET-PKV400B
Optional accessories - Early Warning Software
ET-SWA100
Optional accessories - Replacement Filter Unit
ET-RFV500
Optional accessories - Wireless module
AJ-WM50