Sony VPL-GTZ1 4K SXRD Projector, 4096 x 2160 x 3 pixel

Specifications

Screen Size

66 inch - 147 inch (1.67 m - 3.73 m) (Measured Diagonally)

Display Type

SXRD Projection System

Model Number

VPL-GTZ1

Brand

Sony

Resolution

26542080 (4096 x 2160 x 3) pixel

Display device - Size of effective display area

0.74 inch x 3 SXRD

Projection lens - Focus

Powered

Projection lens - Zoom - Powered/Manual

Powered

Light source - Type

Laser Diode

Light output - Lamp mode: High

2000 lm

Power requirements

AC 100 V to 240 V, 5.9 A to 2.5 A, 50 Hz / 60 Hz

Standby Mode / Networked Standby Mode Activated

After about 10 Minutes

Mass

Approx. 55kg (121 lb) Approx. 50kg (110 lb) (without handle)

Projection lens - Zoom - Ratio

Approx. x 1.6

Color light output - Lamp mode: High

2000 lm

Dimensions (W x H x D)

1,250 mm × 265 mm × 535 mm (49.2 inches × 10.4 inches × 21.1 inches) 1,100 mm × 265 mm × 535 mm (43.3 inches × 10.4 inches × 21.1 inches) (without handle)

Contrast ratio

∞:1 (Dynamic Contrast)

Acoustic noise - Lamp mode: Low

26 dB

Power consumption

520 W

Signal - Accepted digital signals

VGA, SVGA, XGA, WXGA(1280x768), QuadVGA, SXGA, SXGA+

Signal - Video signal input

480/60p, 576/50p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/60p, 1080/50p, 1080/24p, 3840x2160/24p, 3840x2160/25p, 3840x2160/30p, 3840x2160/50p*2, 3840x2160/60p*2, 4096x2160/24p, 4096x2160/25p, 4096x2160/30p, 4096x2160/50p*2, 4096 x 2160/60p*2

INPUT OUTPUT (Computer/Video/Control) - HDMI

HDMI (x4)

INPUT OUTPUT (Computer/Video/Control) - REMOTE

RS-232C connector: D-sub 9-pin (female)

INPUT OUTPUT (Computer/Video/Control) - LAN

RJ-45, 10Base-T/100BASE-TX

INPUT OUTPUT (Computer/Video/Control) - IR IN

Mini Jack

INPUT OUTPUT (Computer/Video/Control) - USB

Type A, DC 5V, Max. 500 mA

Operating temperature (Operating humidity)

5°C to 35°C (41°F to 95°F) / 35% to 85% (no condensation)

Storage temperature (Storage humidity)

-20°C to +60°C (-4°F to +140°F) / 10% to 90% (no condensation)

Power consumption - Standby

0.4 W (when Remote Start is set to Off)

Power consumption - Networked Standby

0.6 W (LAN) (when Remote Start is set to On) When a LAN terminal is not connected, it becomes a low power consumption mode (0.5 W)

Optional accessories - RF 3D Glasses

TDG-BT500A

Get Best Price>>