We are manufacturer and supplier of Bottom Discharge Centrifuge Machine. These are known in market for their distinctive features like robust construction, easy to use, low maintenance, and highly efficient performance. The centrifuge has diameter of 72 inches.
Shaft And Bearings:
The main shaft is of suitable steel and is amply proportioned to withstand the loads imposed on it by the centrifugal forces caused by all normal uneven distribution of the charge in the basket. The bearings supporting the main shaft are heavy duty ball/roller bearings which have a statistical life of 5000 or more running hours. These bearings are grease lubricated. Grease retainers are fitted to ensure long lubricating intervals.
Vibration Suspension :
These centrifuges are fitted with heavy duty three point Pendulum suspension for vibration absorption. Hemispherical bearings are used at both the ends of the suspension rods. For four point suspension we use viscous damper anti vibration pads
The drive system consists of a 415V/3 Ph/50Hz squirrel cage induction TEFC electric motor which drives the basket through V-belts. The motor is mounted at the basket casing (outer drum) and there is provision for tensioning the belts. All models are fitted with Centrifugal clutch pulley at the motor shaft. These clutches are heavy duty types designed specially for centrifuge duties.
Material Of Construction:
This shall normally be M.S. or rubber-lined M.S. or S.S. (AISI 304 or 316) at the contact surface.