We are Leading distributor, wholesale supplier and service provider of all types of programming cables.
FX Series PLC Programming Cable :
Melsec PLC''s from Mitsubishi can be connected to PC''s running Medoc programming software using various cables. Each different I/O module uses a different pin assignment.
- Mitsubishi FX3U series FX-USB-AW USB PLC programming cable : FX-USB-AW has USB/RS422 (8pin) interface for Mitsubishi FX3UC/FX2N/FX1N/FX0/FX0S/FX1S series PLC,2.5 meters,with communication indicator,the largest communications range is up to 2Km.FX-USB-AW is the programming cable in which USB interface provided both the serial connection and RS-422 8 PIN signal conversion.
The working power supply of this cable is directly from the USB port, but not the PLC programming interface.The two-color LED on the converter box indicates data’s transceiving status.
FX-USB-AW is applicable to the FX3UC series PLC which has the MD8F radio socket of Mitsubishi,such as FX3U/FX2N/FX1N/FX0/FX0N/FX0S/FX1S,and it can substitute the FX-232AW module.The largest communications distance is two kilometers.Features :
. Support FX-USB-AW operating system:Windows2000/XP (WinNT4/95/98/Me/DOS not included ) 2.
Support FX-USB-AW programming software version:FXGP /WIN V1.0, GPP V4.0, GX Developer V7.0 and above.3.
Fully compatible with USB V1.1 and USB CDC V1.1 4.
USB-bus powered,with current consumption of 50 mA 5.
Baud rate:300 bps~1Mbps automatically adapt to the standard baud rate 6.
Support UART data format:data bits:7-8;
stop bit:1, 2;
check-bit:odd/even/no parity 7.
Support long-distance communications,the largest communications is two kilometers (9600 bps) 8.
Each PC only supports one USB cable programming 9.
Working temperature:-20~+75°c 10.