SS And MS Color Coated Horizontal Laminar Air Flow For Laboratory

LAMINAR AIR FLOW (HORIZONTAL)

Make: SSU.

Specification:

The body is constructed in double walled S.S.

 

The work table is made of stainless steel 304 grade.

All joints are sealed with scholastic sealant.

 

Transparent front and side panels of UV resistant Polycarbonate sheet fully transparent fixed with clamps.

 

The unit is fitted with per-filter and is made to pass through highly effective HEPA (High Efficiency Particular Air) filter having efficiency rating as high as 99.97% with cold, DOP, thus retaining all air-borne particles of size : 0.3 micron and larger.

 

Using a dynamic machine, the blower and motor assembly ISI marked is statically and dynamically balanced.

 

Blower Assembly with high RPM motor, enclosed in an SS casing suitably suspended in a pair springs & connected to the filter chamber through flexible canvas duct

 

Blowers are mounted on vibration isolation mounts to Minimize vibration and possess noiseless operation.

 

Height of the working table provides comfortable " Sit Down" working position for the operation to work on 220/230 volts AC. Supply

 

Individual controlling switch & indicator for blower, UV And fluorescent tubes.

 

 

Technical Detail

 

Working Size : 4ft x 2ft x2ft (WxDxH)

 

Table : SS 304grade Platform

 

Pre Filter : Media Synthetic, non-woven polyester fibers (2nos)4ft x 2ft x6"of 

HEPA Filters : Media Ultra clean glass fiber paper -

imported down to 

HEPA size :     3ft x 2ft x 6" (2nos)

Retention :     

Efficiency :     99.97%

Air Flow :       Horizontal

Door :             UV resistant polycarbonate door in

front facia with magnet lock

Add on feature: Provision of cock ( air , vacuum) 1

UV tube : 1x15W Philips

Fluorescent tube: 1x15W Philips

Blower Assembly :DIDW type ISI marked assembly

motors)

Leg Levellers : To adjust by +/- 10 mm

Noise level : >= 65 DB

Manometer : 0-100 mm

Power :220-230 Volts, 50 Hz Single Phase

Micro proser based controller with UV light and florescent light and blower sapped controller.