• LATICRETE PUA 212 Adhesive- 8Kg, Bucket - Image 1 by MYK Laticrete India Private Limited
  • LATICRETE PUA 212 Adhesive- 8Kg, Bucket - Image 2 by MYK Laticrete India Private Limited
  • LATICRETE PUA 212 Adhesive- 8Kg, Bucket - Image 3 by MYK Laticrete India Private Limited
  • LATICRETE PUA 212 Adhesive- 8Kg, Bucket - Image 4 by MYK Laticrete India Private Limited
  • LATICRETE PUA 212 Adhesive- 8Kg, Bucket - Image 5 by MYK Laticrete India Private Limited
  • LATICRETE PUA 212 Adhesive- 8Kg, Bucket - Image 6 by MYK Laticrete India Private Limited
  • LATICRETE PUA 212 Adhesive- 8Kg, Bucket video by MYK Laticrete India Private Limited
Packaging Size
8 Kg
Packaging Type
Bucket
Surface Of Application
Metal
Material Compatibility
Metal
Coverage
15 to 17 sq.ft per pack of 8 kg
Color
Off White
Product Brochure
PUA 212® is a two component, modified Polyurethane Adhesive designed for the installation of ceramic tile, vitrified tile, metal tile, glass tile, agglomerates, glass mosaic tile and natural stone on any substrate. It is highly elastic, thixotropic and suitable to lay water sensitive tiles & stones on highly expandable, deformable, absorbent and non-absorbent substrates.
Features and benefits:
  • Highly flexible & superior bond strength
  • Suitable for all the substrates including metal
  • Good for vertical applications
  • Ideal for agglomerates & moisture sensitive tiles / stones

Certification:
  • EN: 12004 / ISO 13007 : R2T
  • IS 15477 : 2019 : TYPE 5 T
  • VOC: Very Low

How to apply:
Surface Preparation:
  • All surfaces should be between 40° F(4° C) and 95° F(35° C) and structurally sound, clean and free of all dirt, oil, grease, loose peeling paint, laitance, concrete sealers or curing compounds.
  • Substrates must be compact and consistent, free from any rising dampness, with no loose, flaky, or imperfectly anchored parts. The substrate must be stable, without cracks and have already completed the curing period of hygrometric shrinkage. Uneven areas must be corrected with suitable smoothing and finishing products
  • Installation shall be made on a dry surface. New concrete slabs must be damp cured and at least 28 days old prior to application. All slabs must be plumb and true to within 1/4" (6mm) in 10ft (3m). Expansion joints shall be provided through the tile work from all construction or expansion joints in the substrate
  • Follow ANSI Specification AN-3.8 "Requirements for Expansion Joints" or TCA Detail EJ171-91 "Expansion Joints". Do not cover expansion joints with mortar. Glass Mesh Mortar Unit: follow TCA installation detail W244

Mixing:
MYK LATICRETE PUA 212 is prepared by mixing together parts A and B from the bottom upwards, using a low-rev (≈ 400/min.) helicoidal agitator, with the preset ratio of 1: 4 of the packs. Pour part B into the bucket containing part B, being careful to mix the two parts uniformly until a smooth, even coloured mixture is obtained. The user must mix a quantity of adhesive which can be consumed within 1 hour at +25 °C / 50% R.H. Packs of MYK LATICRETE PUA 212 adhesive must be stored at a temperature of ≈ +25 °C for at least 2/3 days prior to use.

Application:
  • Tile/Stone, Mesh Backed GMT & Agglomerates: Apply adhesive to the substrate with the flat side of the trowel, pressing firmly to work into surface. Comb on additional adhesive with the notched side. Use the proper sized notched trowel to ensure full bedding of the tile. Spread as much adhesive as can be covered with tile in 10 minutes. Back butter large format tiles (> 12"x12") to provide full bedding and firm support. Place tiles into wet, sticky adhesive and beat in using a beating block and rubber mallet to imbed tile and adjust level. Check adhesive for complete coverage by periodically removing a tile and inspecting bedding adhesive transfer onto back of tile. If adhesive is skinned over (not sticky), remove and replace with fresh adhesive.
Available in Grey color also.
MYK Laticrete India Private Limited
Hyderabad, Telangana
GST
15 yrs
★★★★★4.2 (143)

Looking to import from India?

View export-ready suppliers

Visit IndiaMART Export

Seller Ratings & Reviews

Seller's final rating is a weighted average of star ratings, review recency, content quality, and rater quality score.
4.2★★★★★★★★★★

143 reviews

5★91
4★18
3★7
2★4
1★23
User Satisfaction
82%

Response

91%

Quality

78%

Delivery

Top Local sellers near you forTile Adhesives

Explore Related Categories

About MYK Laticrete India Private Limited

Contact Number
+91-7942544923
Total Number of Employees
501 To 1000 People
GST Registration Date
2017
GST Legal status
Limited Company
GST Nature of business
Manufacturer
GST Turnover
> 500 Cr
GST Additional NOB
Office / Sale Office,Factory / Manufacturing,Warehouse / Depot,Service Provision,Recipient of Goods or Services,Supplier of Services,Wholesale Business
Verified GST Number
36**********1ZK
IndiaMART Member Since
Feb 2011
Year of Establishment
2001
Call Response Rate
82%

Additional Information

Availability
In Stock
Price
Excluding all taxes
Ships from
Hyderabad