Converter, NPM301

Support 32-bit ARM processor

Adopt 10/100M self-adaptive Ethernet interface

Support AUTO MDI/MDIX, crossover cable or straight-through cable connection optional

Support 300bps-115200bps non-blocking communication

Support low power consumption mode and high performance mode

Support TCP, UDP, ARP, ICMP, DHCP and DNS protocols

Support TCP Server, TCP Client, TCP Auto, UDP and Real COM driver working modes

Support cross-gateway and cross-router communication

Support standard TCP/IP SOCKET application access

Support virtual serial port driver access mode and automatic recovery of network

Provide Windows configuration tools that are easy-to-use and can be used in mass installation

Support AT command and WEB configuration modes

Low consumption design

Working temperature -4075

System Information

32-bit ARM processor

LAN

Standard 10Base-T/100Base-TX

Protocol TCP, UDP, ARP, ICMP, DHCP and DNS

Rate 10/100M

Working mode full or half duplex

Work pattern TCP Server, TCP Client, TCP Auto, UDP and Real COM driver under low power consumption and high performance modes

Serial Port

Interface support TXD, RXD, RTS, CTS, DTR, and DSR signals, and 4 sessions

Parity bit None, Even, Odd, Space, Mark

Data bit 5bit, 6bit, 7bit, 8bit

Stop bit 1bit, 2bit

Baud rate 300bps~115200bps

Flow control support RTS/CTS flow control or no flow control

Software

Configuration WEB browser, Windows HyperTerminal, BlueEyes_II management software, virtual serial port driver

Power Supply

Power input 3.3VDC

Low power mode

No-load power 0.2442W@3.3VDC

Full-load power 0.2409W@3.3VDC