Liquid ORG Emulsion Breaker and Reverse Demulsifier, For Laboratory, Grade Standard: Technical Grade

Get Latest Price

Call for Best Deal+91-8047667762

by:RX Marine International, Mumbai

Your requirement is sent to RX Marine International, Mumbai

Product Specifications

Usage

Laboratory

Physical State

Liquid

Grade Standard

Technical Grade

Packaging Type

Plastic Can

Packaging Size

25 Litres

Minimum Order Quantity

5 Litre

Port Of Dispatch

India And Middle East

Product Capacity

10 MT/Day

Delivery Time

Packaging Details

5) Drilling starch Drilling Starch - M3OM is used for reducing fluid loss in a variety of water based drilling flu ids(API Specification 13A) and has beneficial secondary effects on mud rheology. In drilling wells, a liquid (mud) is pumped into the hole to clean and cool the drill bit and to flush to the surface the drill bit cuttings and suspending the drill cuttings while drilling is paused. The most important physical characteristics of the drilling fluid is the viscosity and the water holding/retaining characteristics. :part code: RXSOL-81-8126-025 6) Oil Absorbent Pillows :part Code: RXSOL-17-1745-001 7) Oil Boom :part Code: RXSOL-17-1015-001 8) Oil Spill Absorbent Pad :part Code: RXSOL-17-1014-100 9) Degreaser Citrus Rino:part Code: RXSOL-10-1726-020. Click Link-www.rxmarine.com/Degreaser-Citrus-Rino 10) Lime Stone :part Code: RXSOL-81-8115-025 11) Marble Chips :part Code: RXSOL-81-8116-025 12) Non Emulsifier NE-118 :part Code: RXSOL-81-8178-210

Contact Seller Instantly,

Its Free!!

Let's Call

Product Description

1) Demulsifier Emulsion Breaker 25 Ltr

RXSOL DEMULSIFIER is Water-In-Oil Demulsifiers, which can be used as stand-alone Demulsifiers to separate Formation Water from Crude Oil Emulsion. There are vast differences and Characteristics of Crude Oils produced in various Fields. Use and application Oil Soluble Demulsifier Testing & Selection is accomplished by standard Bottle Tests in Lab followed by Field Trial Tests. They are commonly used in the processing of crude oil for effectively separating formation water from emulsions in crude oil.

This is a complex chemical which is removed water from the water in Oil (W/O) and oil in water (O/W) emulsion, which are generated or produce in Crude oil, Petroleum recovery & refinery process. As this Emulsion contains water, which causes many problem for oil & gas producer so the emulsion have to be brake down or demulsified to separate out the water.

Demulsifier or Emulsion-breaker is used in

Remove oil from wastewater stream.
Remove water from petrochemical, natural oils & water-gas mixture.
Remove solid from the sludge.
Minimize the wastage to store from waste system.

Mineral crude oil producer, supplier, petroleum & Petro chemical process plant, oil refinery plant, waste water treatment plant etc use Demulsifier or Emulsion braker.

Demulsifier or Emulsion braker is not only remove the water from emulsion but also help in following manner :

Lower the operating cost.
Lower emissions.
Reduce wastage & its disposal cost.
Increase the profit by recovery of material.
Increase the efficiency of the plant.

Due to vast differences in characteristics of crude oil produced in various fields, as well as in the production plant & treatment systems, Demulsifier or Emulsion-braker is usually formulated as per specified field to get optimum result. Part No.- RXSOL-16-2064-025

2) Water Soluble Demulsifier

RXSOL water soluble demulsifier is a totally organics surfactants solution with water and soluble in crude oil for the demulsification of oil in water, capable of performance at room temperature, but with improved speed and percentage of oil removed when applied at temperatures higher about 20 degree of room temperature. RXSOL salt removal demulsifier destabilizes the oil-water interface that surrounds each water particle in the emulsion, replaces the emulsifier molecules (if any), and allows the water to coalesce. RXSOL demulsifier is a completely non-hazardous, non-toxic, biodegrable, non-corrosive, non-abrasive; non-ash-forming treatment, which will improve the quality of the fuel it, is added to. Part No.- RXSOL-81-8157-210

3) Demulsifier ORG ::: Power of Chemical to break EMULSION in two phase hydrocarbon phase (oil) and a water-phase. Dosage and application will vary based on emulsion characteristics. For most crude or fuel oil based emulsions, a starting concentration of 0.1% at 165°F with a minimum heated recirculation contact time. Part No.- RXSOL-81-8159-210

4) Reverse Demulsifier ::: RXSOL Reverse Demulsifier is a fast acting demulsifier which liberates the oil and leaves a clear water phase.Part No.- RXSOL-81-8183-210

Ferrochrome Lignosulfonate (FCLS) :
RXSOL FCLS is an excellent all-purpose deflocculant and fluid-loss-control agent. It is effective for viscosity control and fluid loss reduction in all water-base mud systems, including freshwater, brackish water, seawater, salt, lime, gyp and potassium systems.
RXSOL FCLS has superior deflocculating capabilities, even in the presence of contaminants and elevated temperatures. It is effective at temperature in excess of 150℃ (302).
part Code: RXSOL-81-8108-025

Call Now