Packaged Drinking Water Plant, 30 BPM

As people become more health conscious, the demand for bottled water is increasing at a rapid rate. Bottled water provides easy transportability and assured water quality.
With our several years of experience in the Water Treatment Field, we have developed comprehensive, economically viable packages, such that the capital outlay is optimized. Our packages are offered in modules so that they can be upgraded at a later date as the demand increases. Typically a Packaged Drinking Water Plant may consist of:

• Water Treatment Plant
• Packaging Plant

The Water Treatment Plant consists of One or All of the below-mentioned process:

Chlorine/Hypochlorite Dosing System

• Chlorine/Hypochlorite dosing system is done in the raw water for disinfection/oxidation of iron and manganese (if present) in the water before filtration. sodium hypochlorite reacts with water to form hypochlorite acids which acts as disinfecting agent.

Pressure Sand Filter

• Raw Water is first filtered by the filtration unit in series prior to feeding the RO Plant. Pressure Sand Filter unit is provided for removal of Suspended Matters & Turbidity from raw water.

Activated Carbon Filter

• Basic Natural water may contain Colour, Odour, Chlorine & Organics in different proportion, which is undesirable for portable application, and hence, it is necessary to remove the same from the water. The Activated Carbon Filter removes Chlorine, Odour, & Colour, Pesticides, Organics, and Inorganics Impurities while passing the water through Carbon Bed.

SMBS Dosing System

• The Chlorinated water may oxidize the membrane and to avoid the same precautionary we provide Sodium Meta BiSulphite dosing system

Anti Sealant Dosing

• The hardness salts of Calcium & Magnesium are likely to be precipitated if the concentration exceeds its solubility limit & it may fault the membranes resulting into scaling which ultimately leads to poor treated water quality from RO System. To prevent this Antiscalant dosing (scale inhibitor) dosing system is provided.

Micron Cartridge Filter

• Micron Cartridge Filter having Series of filtration with the 20 Micron, 10 Micron, 5 Micron, 1 Micron, 0.45 Micron & 0.2 Micron Cartridge. This is a Consumable Cartridge and should replace it after Days of operation. This for Extra Safety of Product water as it comes through a series of filtration and there are some chances of slippages of particles, which can be arrested through the Cartridges

The Packaging unit consists of one or All of the mentioned process:

Bottle Manufacturing by PET Blowing Machine:

• For manufacturing of PET Bottles for Different sizes and available in Semi and Automatic Operation up to 3600 Bottles per hour.

Rinsing - Filling – Capping – Sealing Machine:

• The bottles are fed into the machine which automatically rinses, fills and screws the cap on it. Caps are stamped with the date of manufacture and expiry before being put into the hopper for screwing on to the bottle.

Labeling:

• In this section, the labels and the neck sleeve are to be manually put on the bottles which will then pass through the shrink tunnels and onto packing conveyor.