p3 Pad Printer, Model Name/Number: tdy300, 12"x16"x18"

1 Put the machine on flat  ground and turn on the power

2)Press adjusting switch， the rubber pad moving over the working  table.Loosen the adjusting screw, take out the cartridge, wipping oil of  pad pringting plate and cartridge by cloth moistened diluent. (In order  not to damage the sealing of the cartridge,couldn''t scratch with a hard  object.Placing the cartridge, the knife edge is up)

3)Press inching switch,rubber pad moving over plate.With a multi-purpose  wrench to loosen the nut,so the plate loose.Turn the plate to find the  necessary code,moving below the rubber pad,aiming at pad,then use wrench  to tightening the nut.

4)Press inching switch,rubber pad moving  over working table.Installing the cartridge with oil cup clamp(pressing  screw is aimed at three holes on the oil cup ring). Turn on the  switch,adjusting the speed to the slowest,screwing pressing screw of  three oil cup in turn until the plate can be cleaned.Then screw the nut  of the pressing srew.(Don''t screw one screw then do others)

Technical Parameters:

Voltage 220 V

Power 55WWorking 
Speed1200-3800T/h
Size420*300*375mm
(17"*12"*15") Net Weight19kg (33lbs)

Instruction

Note:
1)During the printing process,should keep the cleaning of the rubber pad  and palte.After using,clean the ink.

2)According to the printed code or shapes,choosing suitable rubber pad.

3)According to the material of object,choosing the corret inks and  diluent,