Servo Voltage Stabiliser: Three Phase - Aircooled 3 kVA - 150 kVA.

Khynetic Technologies

Bengaluru

₹ 85,000

★★★★★5.0 (2)

Product Specifications

Type: Automatic
Rated Capacity: 50 KVA
Country of Origin: Made in India
Brand: Servo
Product Brochure: View Now

Product Description

Construction	Indoor Purpose
Type of Design	Servo Stabiliser with O/P sensing feed-back system
Type Of Cooling	Aircooled
Servo Motor Type	AC Synchronous Stepper Motor
Input Voltage Range	360V - 460V /340V - 460V / 340V - 480V / 310V - 480V Designed as per customer requirement
Input Frequency	47 Hz - 53 Hz
Output Voltage	415 V ; User Settable - 400 V (OR) 380 V (L - L)
Output Voltage Regulation	± 1 %
Control Design	Microcontroller (DSP) based Control System
Waveform Distortion	NIL (Output Waveform same as Input Waveform)
Effect of Load PF on O/P Voltage	NIL
Correction Speed	> 60 V/ Sec
Response Time	10 milli sec
Efficiency	≥ 98 %
Under / Over Voltage Cut-Off	Upper Limit +5% (Above set O/P Voltage) Lower Limit -10% (Below set O/P Voltage)
Short Circuit Protection	HRC Fuse (OR) Optional MCB / MCCB at Input
Output Over Load Protection	Electronic Operative above 110% of rated output current
Phase Reversal Protection	Built-in
Single Phasing Prevention	Built-in
Stabiliser "ON/OFF" Operation	User Settable Auto Restart 1 sec - 998 sec User Settable Manual Restart
Display Type	Backlight LCD Display (Will vary as per the Control system)
Parameters Displayed	I/P & O/P Voltage (L-L & L-N), Hz, Amps R-Y-B Will vary as per the Control system used
Front Panel Indications	LED Indication for - Input Present, Output Normal
Front Panel User Interface	MENU, UP/DOWN KEY, ENTER/SET KEY
Event Recorder	Fault Analysis - Check for the Control System Used
Input / Output Connection	Input / Output — Terminal Plate with Nut-Bolt arrangement
Emergency Manual Bypass	Built-in
Output Contactor	Built-in
Surge Protection Device (SPD)	Optional
Ambient Temperature	0° C to 50° C
Rating in kVA	3 kVA to 150 kVA
Design Standards	As per IS:9815