Single Phase Motor

To fulfill the divergent needs of our valued clients, we are betrothed in offering Single Phase Motor. The offered motor is extensively used in several industries such as pharmaceutical, machine tools and textile industry. Our provided motor is well-manufactured using optimum quality components and advanced technology.

Construction:

Standard motors with single shaft extention are horizontal foot mounted (B3 as per IS:2253)

Range:

Standard Three phase 0.125 HP to 20 HP (0.09 KW to 15 KW), frame size 56 to 160 L in 2, 4.6 and 8 pole design. Single phase motors 0.25 H.P. to 3 H.P

Specifications and Performance:

Motors are continuously rated 51 duty, suitable for 415 volts +-6%, 50 C/s +-3%, three phase A.G. Supply with class "EIS" insulation, an ambient temperature of 40°C and site attitude of up to 1000m above main sea level. All T.E.F.C. Squirrel cage motors comply with IS:325 & dimension according to IS:2223.

Enclosure:

Motors have IP-44 protection as defined in IS:4691. Motors can be supplied with IP-54 and IP-55 on request which provides protection against damaging ingress of dirt and harmful effects of waterjet

Pressure Die-Cast Rotors:

All rotors are of high pressure aluminum die-cast to ensure improved reliability due to elimination of joint that exist M a brazed rotor. Each rotor Is dynamically balanced along with thefan on electronic machineto ensure very low amplitudes on vibration and noise level.

Insulation System And Winding Protection:

Motors are provided with class "B" insulation system, class "F" can be suppled on request PTC thermistors in the Stator winding can be supplied on request.

Noise Level And Vibration:

Motors are designed level. Dynamically balanced having perfect alignment and a fine control on the uniformity of air gap minimize the vibration. Pulley. Bearing seats and air gap surfaces are grinding resulting in vibration free running.

Terminal Box:

Standard location of the Plastic / M.S. Terminal box with two cable conduct entries is on the side of the housing.

Bearing System:

Bearings are anti-friction ball and roller bearings. Re-greasing can be provided on request. The grease used and recommended is lithium based with drop point greater than 160°.

Paint:

All standard motors are painted with semi-glossy synthetic enamel paint. However special paint is available on request.

Relevant Isi Standards To Motors: