Ultratech Weather Pro Flex Waterproofing Coating, 15 Kg

Product Description: Dampness is unwanted moisture that enters the structure of our home. Dampness is the biggest enemy of the strength of the home, which makes our home weak and hollow from the inside. Why is dampness the biggest enemy of strength? Dampness causes corrosion of steel and formation of cracks in RCC, which reduces the strength of the structure. This makes our home weak and hollow from inside, eventually affecting its durability. How can we protect the strength of our home from dampness? Once dampness enters the structure, it is impossible to get rid of. By the time it is visible, the damage to the strength is already done. Repair work is expensive and provides only temporary relief.  Hence it is necessary to adopt a preventive solution to protect the strength of our home from dampness. Where does dampness enter from? Dampness can enter from any part of the home – roofs, walls or even the foundation. It can also enter the structure from wet areas of home like kitchen and bathroom Wall  Roof Foundation Bathroom Kitchen Water Tank Only preventive waterproofing when building your home can make your home waterproof from the inside. Use Weather Pro Waterproofing System during construction, to protect your home's strength from dampness and seepage. This system has two components  Exterior areas of home like roofs, terraces and walls face the impact of rain and weather. Similarly, interior areas inside thehome like bathrooms and kitchens have high water contact. From such areas, there is a high risk of dampness seeping into the structure. Use Flex or Flex for double protection of high-risk areas of the home. These polymer-based waterproofing products form a durable and impervious coating, blocking the entry of dampness into the structure. Flex and Hi-Flex coatings are flexible, elongating up to 50% and 100% respectively*, which reduces the possibility of cracks and makes them long lasting. They can also withstand high water pressure, up to 7 bars, which helps them withstand environmental conditions and high water contact inside the home. Single Component Waterproofing is a specialist waterproofing product for drinking water tanks. It is food-grade approved by CFTRI (Central Food Technological Research Institute) making it safe for storage tanks of drinking water. Process of Application As standard waterproofing practice, use WP+200 with cement while casting slabs. After surface preparation, apply two coats of the Single Component mix, with a gap of 2-3 hours in between, with 2nd coat in perpendicular direction to the 1st coat. It is highly recommended to provide a layer of screed or plaster over the waterproofing coat. Coverage 1kg of Single Component mixed with 350-380ml of water should cover 11 sq. ft. in 2 coats with an average thickness 0.7mm per coat. Feature Better dampness prevention Safe for drinking water Helps Protect structural strength Higher durability of home Quick application