The range of Hi-Volume Centrifuges are designed for large capacity centrifuge tubes , bottles and blood bags. These centrifuges are mainly used in chemical and pharmaceutical processing, Biotech Labs etc. where large volume tubes & bottles are used. Fixed Angle Rotor Heads with 4500 RPM are available at following Cap./ml - 6x500, 8x250, 12x100, 16x50, 36x25, 72x15. Salient Features
Floor model centrifuge is heavy duty unit fabricated from steel and epoxy coating.
Microprocessor controls provided has 99 program memory.
Brush less induction motor drives.
The microprocessor control is provided with programmable variable speed control up to 4500 RPM with 10 RPM increment.
Continues read out of working RCF Value.
1 to 120 minutes timer programmable in 1 minute increment with infinite mode.
User programmable Acceleration and Deceleration time range from 40 seconds to 450 seconds.
Mechanical and Electronic lid lock with indicator.
Imbalance indicator and LCD display of set and working parameters.
Gas spring fitted fail safe door.
Technical Specification
Model
SI-MP-45 Max. Speed4500 RPM Max. RCF6080 xg. Width750 mm Depth850 mm Height905 mm
A centrifuge is a system that separates the components of a liquid or fluid (and even gases) using the centrifugal force. It is a biological instrument used for the separation of liquid material based on its density and weight. This is done by rotating the fluid in a container at high speed
Centrifuge Machine is very economical & efficient equipment for solid/liquid separation. The centrifuge have Rotation Basket at high RPM & slurries, liquid drop flush out & only cake & powder remaining in basket
With rich industry experience and knowledge, we are manufacturing and supplying a wide array of Vertical Centrifugal Machine Dies. This machine die is manufactured by using utmost quality material & modern techniques in compliance with the set standard of industry. In addition to this, the offered machine die is available in various specifications as per the client’s needs. Our valuable clients can avail this machine die from us at market leading prices.
We manufacture three point suspension under driven centrifuges viz. MANUAL TOP DISCHARGE, BOTTOM DISCHARGE & BAG LIFTING TYPE in Materialof construction Carbon Steel, Stainless Steel and M.S.Rubber lined. Centrifuges are basically used for solid liquid separation
The Main Parts of Centrifuges are Bearing & Shaft, Basket, Drive & Brake.
BEARING & SHAFT
The Bearing used are heavy duty to withstand vibratory load and centrifugal forces. The bearing housing is made of Cast Steel duly machined to close tolerance ensuring longer maintenance free performance. The shaft is made of EN grade material and is balanced independently without basket for higher accuracy.
BASKET
The Basket made from MS/SS sheet of adequate thickness to withstand the material load and centrifugal forces. The Basket is uniformly perforated and duly balanced. The Bottom of Basket is made up of Mild Steel and lined at the inner surface with SS or Rubber as required.
DRIVE
The Drive consists of Motor mounted at the Basket casing driven through V belt with provision of tensioning the Belts. The Centrifuges are fitted with Mechanical Clutch Pulley at the Motor Shaft.
BRAKE
The Centrifuge is fitted with external Shoe Brake with brake liners. The Brakes are heavy duty type designed to bring loaded basket to stop quickly.